LINGDU LD02 Lite Dash Cam 3inch Screen 4K Front 1080P Rear Camera 5.8Gh WiFi GPS Voice Control 24H Parking Monitor Night Vision

Description

● Product Feature
Hardware: 4K front Camera + 1080P Rear Camera + GPS + G-sensor + Super-Capacitor + Type-C connector
Software: 24H Parking Monitor | Voice Control | Loop Recording | Night Vision | Emergency Recording | Parking Assistant | GPS Tracking.
4K+1080P Dual Dash Camera
3″ IPS Screen
Built-in Wifi & App Control(Free LINGDU App for iOS & Android)
Built‒In GPS(Free LINGDU GPS Player)
Built-in G‒Sensor(Off/ Low/ MID(Default)/ High)
Time-Lapse Parking Mode
● 5.8GHz WiFi
The videos and pictures can be viewed and downloaded to the smartphone through the dash cam’s WiFi and LINGDU App, No need to take out the TF card to check on the computer. By the way, the dash cam’s WiFi cannot be connected to Internet, it just supports about 9fts for your to connect to phone.
Especially, the 5.8Ghz band WiFi can make your mobile phone connect to LD02 Lite more quickly and stably.
● Voice Control (English Only)
It supports English voice control to free your hand, such as “Take Picture”, and “Open/Turn off Recording”.
● GPS Tracking
GPS will record driving route, includes the information of position,speed, Longitude and latitude, which also can be shown on the video along with the date and time stamp.
● Package List
(1) LD02 Lite Dash Cam *1,
(2) Rear Camera(6m/20ft) *1,
(3) Electrostatic film *2,
(4) Car charger *1,
(5) Type-C power cable (3.5M/12ft) *1,
(6) 64G TF card *1,
(7) Cable Clips *5,
(8) Pry Tool *1,
(9) User Manual *1,
64GB microSD card is provided with the LINGDU dashcam when you purchase the product.
Be sure to format your microSD card with your dash cam for the first time use.
Connect your smartphone directly to the dash cam via WiFi within a 10-foot range.
The LD02-Lite dash cam has a 24-hour parking monitoring function.
This feature requires a matching Type-C USB hardwire kit
(ASIN: B0BML1DK8W, not included).
Installation Guide:
Paste the front camera on the electrostatic sticker and adjust the angle of the lens. Mount the rear camera to the rear windshield. Connect the front camera and rear camera.
Use a pry tool to pry up the edge of the rubber window and plug in the rear camera connection cable.
Plug the cigarette lighter power cord into the cigarette lighter socket and the front camera.
Loop Recording:
When the storage card is full and cannot record new videos, the loop recording function automatically overwrites the oldest files to ensure that the dashcam is always recording. This function helps save storage space and protects important driving data without requiring manual deletion of old records.
Parking Monitoring:
There are two parking modes to choose from:
Time-Lapse Parking Mod
Collision Detection Parking Mode
This function is only valid when the matching 3-Lead Hardwire Kit is installed correctly, and the output current of the Hardwire Kit needs to reach 2.5A. (not included, need to be purchased separately, search: B0BML1DK8W)
Time-Lapse Parking Mod:
After turning off the engine and locking the key, the dashcam switches to time-lapse 1fps recording mode. If there is a collision that reaches the set G-Sensor level, the camera locks a 1-minute video clip, saves it in the “Events” folder, and then returns to time-lapse recording.
Collision Detection Parking Mode:
The dashcam stops continuous recording and enters impact detection mode when the car engine is turned off and key is locked. If there’s a collision that reaches the set G-Sensor level, it turns on and records a 1-minute video, then saves it in the “Events” folder before shutting down. Next time the car starts, the camera returns to normal recording mode automatically and starts continuous recording.
Tip: The product needs to be equipped with a step-down cable to achieve 24H monitoring function
//www.aliexpress.us/item/3256805767676513.html?gatewayAdapt=glo2usa4itemAdapt